Warning: count(): Parameter must be an array or an object that implements Countable in /var/www/u2258409/data/www/radiohill.net/wp-content/plugins/formcraft3/formcraft-main.php on line 4926

The RH6138 is a solid state, broadband power amplifier designed to meet the new standards of software defined radios (SDR) to meet the highest performance requirements for HF radios in modern digital communication systems.

The RH6138 is universal device providing automatic/manual configuration of its circuitry and gain depending of the input signal level. The RF Amplifier/Power Supply is a stand alone unit suitable for tabletop or 19” rack installation.

RH6138 is capable to operate with radios complying MIL-STD-188-141A, STANAG 4444, STANAG 5066. The Power amplifier meets MIL-STD-810E.

The main features of the amplifier are:

  • Built-in controller
  • Built-in Pre-amplifier
  • LCD monitor
  • 2 –levels overheat protection
  • Short/open output protection
  • Continuous operational cycle at full output power
  • High reliability in harsh environment
6136 rh6138-1000w-RH6138-1000W-PRODUCTS HF

Technical specifications

Frequency range: 1.5-30 MHz
Output Power: in SSB mode

in CW mode

peak — 1000 W

average — 1000 W

Gain: 14 / 42 dB (automatic switching)
Gain flatness in frequency range ±1 dB
Input power level 40 W / 18±3 dBm


Intermodulation  better than –32 dB (ref to any tone)
Non-harmonic components: better than – 70dB
Harmonic components: better than – 60dB is provided with 8-bands switchable filter at frequency bands:

1.5-2.2 MHz

2.2-3.2 MHz

3.2-4.6 MHz

4.6-6.7 MHz

6.7-9.8 MHz

9.8-14.2 MHz

14.2-20.6 MHz

20.6-30 MHz

Input/output impedance: 50 Ω
VSWR 2:1 – 4:1
Operation with unmatched load Output power is reduced,

650W at VSWR=2.0

450W at VSWR =3.0

330W at VSWR =4.0

260W at VSWR =5.0 autonomous protection at short or open output

Switching on time 3 s
Tx/Rx switching time 10 ms
Rx/Tx switching time 25 ms
Switching between any harmonic filters 2 ms
Cooling system: forced air cooling
Over heat protection: Cooling system automatic control, 2-level protection.
Primary Power:  90-250 VAC, 47-63Hz
Power consumption: Less than 3350 W
Duty cycle: Continuous, with forced air cooling
 Operation temperature range -10 to +50 ºC
Dimensions: 482(W) ×221(H) ×475(D) mm
Weight: 29 kg